We diagnose the problem correctly the first time — and we fix it with genuine parts, not substitutes.
Prepare a useful repair request
Help us identify your Electrolux appliance problem.
A few specific details help us review your request before the visit.
- 1
Appliance
Refrigerator, washer, dryer, dishwasher, range, or another household appliance.
- 2
Symptom
What the appliance is doing—or not doing—and when the problem started.
- 3
Model details
The model number and any visible error code, if available.
- 4
Photos
An optional photo of the model label or visible issue.
Brand names identify the appliance being serviced. Manufacturer authorization is not implied.
Electrolux Appliances We Repair
Electrolux produces a broad range of household appliances. We service every type they make:
- Front-load and top-load washers
- Electric and gas dryers
- Dishwashers
- Refrigerators and freezers
- Induction and electric ranges
- Built-in ovens and cooktops
Whether your machine is a current-generation model or over a decade old, we carry the knowledge and parts to get it running again.
Get a Fast, Honest Repair Quote
Our technicians serve the GTA and Simcoe County. TSSA-certified technicians handle gas and propane appliance work. Transparent pricing, same-day appointments may be available, and every completed repair includes a 90-day parts & labour warranty.
Per appliance · waived for that appliance with an approved repair
Warranty
Completed
Get My Free Quote
A service-call fee of $85 + HST applies to each appliance diagnosed. If you approve a repair for an appliance, that appliance’s service-call fee is waived.
Your Electrolux Expert in Ontario
Electrolux builds sophisticated appliances with precision European engineering. Our technicians diagnose Electrolux IQ-Touch error codes, LuxCare washer drum issues, and induction range faults accurately.
- Genuine Electrolux parts where available
- Same-visit repair in most cases
- 90-day parts and labour warranty
Common Electrolux Appliance Repair Problems — and What Causes Them
Electrolux appliances are well-built, but certain failures appear repeatedly across model lines. Recognising them early can save you from a more expensive repair down the road.
Electrolux Washer Repair: E21 Drainage Error
The E21 error code signals a drainage fault. Water is not leaving the drum at the end of the cycle. The most frequent culprits are a clogged drain filter or a blocked pump impeller — both caused by lint, hair, and debris accumulating over time.
We clear the blockage and inspect the pump housing for damage. Caught before the pump seizes, this is one of the most affordable Electrolux repairs we handle.
Electrolux Dryer Repair: E64 Heating Element Failure
E64 points to a failed heating element — a common fault in Electrolux 4000 and 5000 series dryers. Clothes take far too long to dry, or they come out cold regardless of the heat setting.
Heating elements burn out gradually with repeated thermal cycling. We replace the element with a genuine Electrolux component and test the thermal limiter and thermostats before we leave. A failed limiter left in place will burn out the new element prematurely.
Electrolux Dishwasher Repair: i10 and i20 Error Codes
The i10 code indicates a water supply problem — the dishwasher isn’t filling correctly. The i20 code signals a drainage fault. Either way, the machine won’t complete a cycle.
We inspect the inlet valve, float switch, drain hose, and circulation pump to find the exact source. These errors are rarely caused by a single component, so a thorough diagnostic matters.
Electrolux Refrigerator Repair: Compressor and Fan Motor Failures
An Electrolux refrigerator that warms up typically points to one of two failures: a faulty start relay on the compressor, or a seized evaporator fan motor. Both interrupt the cooling cycle entirely.
We test the compressor circuit under load, check the condenser coils for frost build-up, and replace the failed component. Every completed repair comes with our 90-day parts and labour warranty — so if the same issue returns, we fix it at no charge.
Ice Maker and Door Gasket Failures
Electrolux ice makers jam, produce undersized cubes, or stop entirely — often due to a failed water inlet valve or a cracked auger motor. Door gaskets crack and warp with age, letting cold air escape and forcing the compressor to work harder.
We repair and replace both. Because Electrolux and Frigidaire share internal architectures and many common parts, our technicians know both platforms well.
Electrolux and Frigidaire: Why the Connection Matters for Your Repair
Electrolux acquired Frigidaire in 1986. Since then, the two brands have shared compressor platforms, control board designs, and major components across multiple appliance lines. A technician who knows one platform deeply knows the other.
If you also own a Frigidaire appliance, we service it with the same level of expertise we bring to every Electrolux repair.
Why Choose SureFit for Electrolux Appliance Repair?
Deep Familiarity With Every Electrolux Model Year
Electrolux has changed control board designs, drum bearing configurations, and motor types significantly across generations. We know where each generation tends to fail — and that means faster, more accurate diagnostics for you.
Drum Bearing Replacements Done Right
Front-load Electrolux washers are prone to drum bearing wear, which produces a loud rumbling or grinding noise during the spin cycle. Many shops turn this job away — it requires disassembling the tub and pressing in new bearings precisely.
We do it routinely, using genuine Electrolux bearings and correct torque specifications. A properly installed bearing set restores quiet operation and extends the machine’s life by years.
Genuine Parts — No Substitutes
We order authentic Electrolux components for every repair. Generic or counterfeit parts may cost less upfront, but they fail faster and can damage surrounding components. We don’t use them.
Transparent, Upfront Pricing
Our service call fee is $85 + HST per appliance — waived entirely if you proceed with the repair. That’s below the industry average of $99. We provide a written quote before any work begins, so you know exactly what you’re approving.
No hidden fees. No surprises on the invoice.
90-Day Warranty on Every Completed Repair
Every repair we complete is backed by a 90-day parts and labour warranty. If a covered component fails within that window, we return and fix it at no cost to you.
Appointment Availability
A broken refrigerator or flooded washer can’t wait until next week. Same-day appointments may be available. SureFit confirms timing after reviewing your request.
Electrolux Expertise. Our technicians have hands-on experience with Electrolux’s full product lineup — including models other shops rarely touch. Accurate diagnosis means fewer return visits.
$85 + HST per appliance Diagnostic — Waived with Repair. Our flat-rate service call is $14 below the industry average of $99. Approve the repair and the $85 + HST per appliance service-call fee for that appliance is waived entirely — you pay only for the work itself.
90-Day Parts & Labour Warranty. Every repair is backed by our 90-day warranty. If the same issue returns within that window, we come back and fix it at no charge.
TSSA Certified for Gas Appliances. Our technicians hold TSSA certification for gas and propane appliance work — meeting Ontario’s safety requirements for ranges, ovens, and gas dryers.
Appointment Availability. Same-day appointments may be available. Submit an emergency repair request. SureFit will review the details and confirm current availability.
TSSA Certified for Gas and Propane Appliances
If your Electrolux range or cooktop runs on gas or propane, certification matters. SureFit Appliance Services holds TSSA (Technical Standards and Safety Authority) certification for gas and propane appliance repair. You’re working with a licensed professional — not someone working from a YouTube tutorial.
Our Repair Process
Book Online or Call
Appointment timing is confirmed after SureFit reviews your request. Real people answer — no automated menus.
Diagnosis & Written Quote
A service-call fee of $85 + HST applies to each appliance diagnosed. If you approve a repair for an appliance, that appliance’s service-call fee is waived. No surprise charges.
Expert Repair
Genuine parts where available. Most repairs completed same-visit to minimise downtime.
90-Day Warranty
Every repair backed by our 90-day parts and labour warranty. Issues covered, no charge.
What Our Customers Say
“Electrolux washer was vibrating badly. SureFit found worn suspension rods and replaced them same day. Smooth and quiet again.”
“French door fridge had ice maker issues. SureFit replaced the water inlet valve — working perfectly now.”
“Great experience. Induction range stopped working on one zone — control board issue diagnosed and fixed promptly.”
Frequently Asked Questions About Electrolux Appliance Repair
Is it worth repairing an older Electrolux appliance?
Usually, yes. Electrolux builds appliances to last 10 to 15 years or more. Older models are often simpler mechanically and use parts that are still widely available. We stock components for machines well over a decade old. If the repair cost is significantly less than replacement — which it often is — fixing the machine makes financial sense. We’ll tell you honestly if the repair isn’t worth it.
What does the E21 error code mean on my Electrolux washer?
E21 is a drainage error. Your washer detected that water isn’t leaving the drum within the expected time. The most common cause is a clogged drain filter, though a blocked pump impeller or kinked drain hose can also trigger it. We clear the blockage, inspect the pump, and test the drain cycle before we leave.
Do you carry Electrolux parts with you, or do I have to wait for an order?
We stock high-frequency Electrolux components — heating elements, drain pumps, door gaskets, start relays, inlet valves, and control boards for common model lines. Many repairs are completed in a single visit. If a part requires a special order, we’ll tell you the timeline before you commit to the repair.
How much does Electrolux washer or dryer repair cost?
Cost depends on the fault. Clearing a clogged drain filter costs less than replacing a drum bearing set. Replacing a heating element costs less than a control board. Our service call is $85 + HST per appliance (waived if you proceed with the repair), and we provide a written quote before any work begins. You approve the cost — we don’t start without your sign-off.
Can you repair my Electrolux appliance the same day I call?
Same-day appointments may be available. Submit an emergency repair request. SureFit will review the details and confirm current availability. Call us at (647) 977-2626 and we’ll tell you the earliest available time.
Electrolux Appliance Repair Services
We repair all major Electrolux appliances across Keswick, Barrie, Newmarket and the surrounding area. Select your appliance type below:
Book Your Electrolux Appliance Repair Today
Stop running diagnostics on your own and wondering whether it’s worth the repair. We’ll give you an honest assessment, a firm written quote, and a repair that’s backed by a 90-day warranty.
Book your Electrolux repair appointment online — or call us directly at (647) 977-2626. Same-day appointments may be available. SureFit confirms timing after reviewing your request. Give yourself back a working kitchen or laundry room!
We also service all major appliance brands, including Frigidaire, Samsung, LG, Whirlpool, and more. Need washer repair or dryer repair for another brand? We handle those too.
Need Appliance Help? Call SureFit Today
$85 + HST per appliance diagnostic fee — waived when you approve the repair. 90-day parts & labour warranty on every job.